Table of Contents
Advertisement
Declaration of Conformity
Finish Thompson Inc. hereby declares that the following machine(s) fully comply with the applicable
health and safety requirements as specified by the UKCA Directives listed. The product may not be taken
into service until it has been established that the drive motor for the centrifugal pump complies with the
provisions of all relevant UKCA Directives. The complete product complies with the provisions of the UKCA
Directive on machinery safety provided motors carry UKCA marking.
This declaration is valid provided that the devices are fully assembled and no modifications are made to
these devices.
Type of Device:
Centrifugal Pumps
Models:
DB 6/6H/7/8/9/10
UKCA Directives (and their applicable amendments):
The Supply of Machinery (Safety) Regulations 2008 (UKSI 2008 No. 1597)
Applied Designated Standards:
EN ISO 12100:2010
EN 809:1998+A1:2009+AC:2010
Manufacturer: Finish Thompson Inc.
921 Greengarden Road
Erie, Pennsylvania 16501-1591 U.S.A
Signed,
Product Engineer
26 May 2023
4
Advertisement
Table of Contents
