Changes In Midi Data Format - Yamaha A3000 Upgrade Manual

Changes in MIDI Data Format

Changes in MIDI data format under Version 2 are listed below.
3. Additional Realtime Messages
The following messages have been added. (
3.1.2 Timing clock, Start, Continue, Stop
5. Additional Yamaha System Exclusives
5.3. Parameter change
5.3.7. Object link change
If Program-LFO Sync is set to MIDI, the A3000 controls the LFO period and phase in
accordance with the following incoming realtime messages: timing clock (F8), start
(FA), continue (FB), and stop (FC).
The following messages have been added. (
0 11110000 F0
1 01000011 43
2 0001nnnn nnnn = Device Number
3 01011000 58
4 00000100 04
5 0ccccccc
upper object name (16 bytes)
20 0ccccccc
21 0 t t t t t t t upper object type
22 0ccccccc
lower object name (16 bytes)
37 0ccccccc
38 0 t t t t t t t lower object type
39 0ddddddd data (0:link off, 1:link on)
40 11110111 F7
This message changes the linking between the specified upper and lower objects (be-
tween program and sample, program and sample bank, or sample and sample bank).
The message will not do anything if the current state of either specified object does not
permit the link change, or if either object would need to be replicated to enable the link
change.
Changes in MIDI Data Format
353)
357)
Appendix
43