Yamaha A3000 Upgrade Manual page 22

Changes in PLAY MODE
PLAY - COMMAND Key - EXPORT
PLAY - COMMAND Key - FREZ_PGM
Chapter 2 Upgrade Reference
22
This is a new command. The command can be accessed from the PLAY mode's SAMPLE
function.
You use this command to export (save) a sample to floppy disk in AIFF file format. You
can then load the files into a computer and use them with any of a variety of commer-
cially available applications.
If you select a sample bank for the save, the A3000 exports all of the samples contained
in the bank.
Be aware that most of the sample's sound-related parameter settings will be lost in the
conversion. Although it is possible to reload the AIFF file into the A3000, the original
settings will not be restored.
• Push Knob 1 to execute the command.
• Use Knob 2 or Knob 3 to select the sample or sample bank that you wish to export.
Note that all data must fit on a single floppy disk. It is not possible to export onto mul-
tiple disks.
This is a new command. The command can be accessed from the PLAY mode's EASY
EDIT function.
The command "freezes" the program sound by transferring most of the easy edit set-
tings directly into the program's samples and sample banks. In other words, the com-
mand modifies the samples and banks so that the current easy-edit sound becomes their
"built-in" sound.
This command operates only on freestanding samples and on sample banks. It has no
affect on samples that exist within sample banks.
After making the transfer, the command reinitializes the Easy Edit settings that were
transferred. Note that the following Easy Edit settings cannot be transferred and are not
reinitialized. (Under certain conditions various other settings may also be omitted from
the transfer.)
MIDICtl (MIDI Control) setting.
If sample:
MIDICtl; Pitch page Fine setting; KeyLimit page RngShft (range shift),
If sample bank:
LoLimit, and HiLimit settings.
• Push Knob 1 to execute the command.
• Turn Knob 2 to select whether to target a single sample only (Smp) or else all samples
and sample banks within the program (allSmp).
• If you have selected Smp at Knob 2, use Knob 3 to select the sample or sample bank
to be adjusted.
[Freeze Program]