Vibration and noise
reduction
To reduce the impact of noise and vibration
emission, limit the time of operation, use low
vibration and low-noise operating modes as
well as wear personal protective equipment .
Take the following points into account to
minimise the vibration and noise exposure risks:
Only use the product as intended by its
design and these instructions .
Ensure that the product is in good condition
and well maintained .
Use correct accessory tools for the product
and ensure they are in good condition .
Keep tight grip on the handles/grip surface .
Maintain this product in accordance with
these instructions and keep it well lubricated
(where appropriate) .
Plan your work schedule to spread any high
vibration tool use across a longer period
of time .
Behaviour in emergency
situations
Familiarise yourself with the use of this product
by means of this user manual . Memorise the
safety warnings and follow them to the letter .
This will help to prevent risks and hazards .
Always be alert when using this product,
so that you can recognise and handle risks
early . Fast intervention can prevent serious
injury and damage to property .
Switch the product off and disconnect it
from the mains if there are malfunctions .
Have the product checked by a qualified
professional and repaired, if necessary,
before you operate it again .
Residual risks
Even if properly operating and handling the
product, some residual risks will remain . Due
to its construction and build, the product may
present the following hazards:
Cuts
Hearing loss if working without hearing
protection .
434668_2304_CZ_SK_HU_SI_02.indb 15
434668_2304_CZ_SK_HU_SI_02.indb 15
Damage caused to your health resulting
from hand/arm vibrations if the power tool
is used over a longer period of time or if it is
not properly used and maintained .
m
WARNING!
This product produces an electromagnetic
u
field during operation! This field may
under some circumstances interfere with
active or passive medical implants! To
reduce the risk of serious or fatal injury,
we recommend persons with medical
implants to consult their doctor and the
medical implant manufacturer before
operating this product!
First use
Accessories
To operate this product safely and correctly,
always wear suitable personal protective
equipment .
This includes:
Safety goggles
Hearing protection
Protective gloves
Protective footwear
Unpacking
1 . Open the packaging and remove the
product carefully .
2 . Remove the packaging material as well as
the packaging and transport bracing (if
available) .
3 . Check that the delivery is complete .
4 . Check the product for transport damage .
m
WARNING!
The product and packaging materials are
u
not toys! Children must not be allowed
to play with plastic bags, film and small
parts! There is a risk of swallowing and
suffocation
GB
15
11/3/2023 12:17:24 PM
11/3/2023 12:17:24 PM