Possible Faults And Methods Of Their Elimination - DNIPRO M CD-218 Safety And Operating Instructions Manual

12.

POSSIBLE FAULTS AND METHODS OF THEIR ELIMINATION

Description
of the A possible reason
malfunction
Discharged battery
Battery damaged
Defective power button/
The power
direction of rotation
tool does not
switch
turn on
Faulty electric motor
The battery is not fully
installed in the charger
The plug of the charger's
power cord is not
connected to an electrical
The battery
outlet
does not
Contaminated battery
charge/does
and/or charger contacts
not
Defective battery
Defective charger
Battery capacity has
decreased
Breakdown of gearbox
parts
Excessive
Excessive load on the
noise during
power tool
operation
The internal parts of the
power tool were worn out
Power tool overload
Engine
housing Poor cooling
overheating
Poor cooling
The operating
time of the
Battery life is exhausted
power tool is
too short
Bad Damaged or dull
performance accessories
EU-CD1023001-1023001
Elimination
Charge the battery
Replace the battery
Contact the manufacturer (DNIPRO M
LLC), the DNIPRO-M authorized service
center, or the seller of the product
Contact the manufacturer (DNIPRO M
LLC), the DNIPRO-M authorized service
center, or the seller of the product
Place the battery on the charger as far as
it will go
Connect the charger's power cord plug
to an electrical outlet
Clean the contacts of the battery and/
or charger
Replace the battery
Replace the charger
Contact the manufacturer (DNIPRO M
LLC), the DNIPRO-M authorized service
center, or the seller of the product
Contact the manufacturer (DNIPRO M
LLC), the DNIPRO-M authorized service
center, or the seller of the product
Reduce the load on the power tool
Contact the manufacturer (DNIPRO M
LLC), the DNIPRO-M authorized service
center, or the seller of the product
Reduce the load on the power tool.
Increase the time period for the power
tool to cool down
Clean the ventilation holes. Make sure
that the ventilation openings are not
covered by anything during operation
Make sure that the cooling impeller has
no visual damage and rotates when the
engine rotates
Replace the battery
Replace the accessories
en
11