PROAIM CINEMA Series Assembly Manual

Flowline camera support

Hide thumbs Also See for CINEMA Series:

Flowline Camera Support

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Suspension Line

Camera Hook

Height Adjustment

Knobs

Accessory Bag

No part of this document may be reproduced, stored in a retrieval system, or transmi ed by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permi ed by the applicable copyright

(FLCM-FLN-300N|400N|500N)

A s s e m b l y M a n u a l

statutes or in writing by the Publisher.

Support Arm

Angle Adjustment

Ring

Side Support

Adjustment

Storage Bag

Table of Contents

Need help?

Do you have a question about the CINEMA Series and is the answer not in the manual?

Page 1 Flowline Camera Support (FLCM-FLN-300N|400N|500N) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. Suspension Line Camera Hook Support Arm...
Page 2 Flowline Setup NOTE: It is recommended to attach the minimum required weight for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system. Join Support Arm with Sec on on Support  Jacket, by simple push-fi technique. Slightly loosen all four Adjustment Knobs ...
Page 3 Finally, a ach one end of Safety Belt with  camera and other end with Support Jacket, for more safety & protec on. When folding Flycam Flowline, always make  sure to put the upper part of Support Arm inside hip/waist belt and fasten buckle at the hip/waist belt.

Cinema flcm-fln-300nCinema flcm-fln-400nCinema flcm-fln-500n