Table of Contents
Advertisement
Windows 8 & 10 & 11 configuration
1.
Right-click a network adapter to
assign an IP address and click
Properties.
2.
Select Internet Protocol Version 4
(TCP/IPv4) and click the
Properties button.
3.
In the IP address field,
enter 192.168.1.2.
4.
In the Subnet mask field,
enter 255.255.255.0.
5.
Leave the Default gateway and
DNS settings fields empty.
6.
Click OK and close the dialog boxes.
After completing the initial connection, the First Time Configuration Wizard
guides you through the process of configuring the appliance.
Configure Your appliance
1.
Launch the Web browser and enter https://192.168.1.1 in the address bar.
Note – You might receive a certificate error page due to a known,
unresolved browser conflict. Click Continue to this Web site.
2.
Log in with the default system administrator login name/password,
admin/admin, and click Login.
Figure 2
Appliances Login Page
Figure 1
Internet Protocol (TCP/IP) Properties
Advertisement
Table of Contents
Need help?
Do you have a question about the CHECK POINT FORCE 9000 and is the answer not in the manual?
Questions and answers