Set Up Your Appliance; Option #1 - Use Your Mobile Device; Option #2 - Use Your Pc - Quantum CHECK POINT FORCE 9000 Quick Start Manual

2

SET UP YOUR APPLIANCE

Select one of these options:

OPTION #1 - USE YOUR MOBILE DEVICE

1.
Pull out the service tag on the appliance.
2.
Scan the QR code on the tag to interactively set up your appliance.
Alternatively, browse to https://welcome.checkpoint.com
3.
Follow the online instructions that guide you through the set up steps.

OPTION #2 - USE YOUR PC

Connect Your PC for Initial Setup
Initial setup must be done from a PC connected to the appliance's
management interface via the included Ethernet cable. The management
interface is marked as MGMT on the appliance front panel.