Page 3
Fibre Channel host interface. This document describes minimum requirements and tested configurations for the Prism FC470. Check the customer environment to ensure the minimum requirements are met prior to installing the Prism FC470. The following table lists the Fibre Channel HBAs tested at the time of Tested Fibre Channel this printing.
Page 5
6.4R1 (Note 2) P7000 F45Z (Note 4) LTO-2 P7000 2CKN LTO-2 P7000 SDLT (Note 4) -220 Quantum Prism FC470 Quick Reference Document Operating Package System BSEB Solaris 8 FCE-6460 10.0 (SP4) NB 4.5 Solaris 8 QLA2310F NW 7.0 Solaris 9 LP9402DC BE 9.0...
Page 6
The rest of the backup jobs are queued and completed successfully one by one. Note 2 - NetApp (Ontap 6.4R1 and 6.4.1) recognizes only one Fibre port on the FC470. Devices on the other Fiber port will not be recognized. All devices must be mapped to one port. IBM LTO Gen 2 tape drives are not supported at this time.
Need help?
Do you have a question about the Prism FC470 and is the answer not in the manual?
Questions and answers