Energizer EZMT20V4A User Manual page 7

packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or
temperature above 130 ° C may cause explosion.
g) Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions. Charging improperly or at temperatures
outside the specified range may damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts.This will ensure that the safety of the power tool is maintained.
b) Never service damaged battery packs. Service of battery packs should only be performed
by the manufacturer or authorized service providers.
2.2 SPECIFIC SAFETY WARNINGS FOR SANDER
WARNING!
1) Dusts from materials such as leaded paint, some types of wood and metal can be harmful to your
health.
2) Contact with an inhalation of these dusts can represent a health hazard for the person operating
the appliance and other people in the vicinity.
3) Wear a safety googles and a protective dust mask!
2.3 SPECIAL SAFETY INSTRUCTIONS FOR BATTERY-OPERATED TOOLS
1) Ensure that the tool is switched off before inserting the battery. Inserting a battery into a tool that
is switched on may result in accidents.
2) Recharge the batteries indoors only because the battery charger is designed for indoor use only.
Risk of electric shock.
3) To reduce the electric shock hazard, unplug the battery charger from the mains before cleaning
the charger.
4) Do not subject the battery to strong sunlight over long periods and do not leave it on a heater.
Heat damages the battery and this is risk of explosion.
5) Allow a hot battery to cool before charging.
6) Do not open up the battery and avoid mechanical damage to the battery. Risk of short circuit and
fumes may be emitted that irritate the respiratory tract. Ensure fresh air and seek medical
assistance in the event of discomfort.
7) Do not use non-rechargeable battery. This could damage the appliance.
8) The recommended ambient temperature range for the charging system during charging is from
4º C to 40º C.
7