Package Content List; Assembly - Energizer EZMT20V4A User Manual

4. PACKAGE CONTENT LIST

1) Remove all packaging materials.
2) Remove remaining packaging and packing inserts (if included).
3) Check that the package contents are complete.
4) Check the appliance, the power cord, the power plug of charger and all accessories for
transportation damage or not.
5) Keep the packaging materials as far as possible until the end of the warranty period. Then take it
to your local waste disposal system.
WARNING! Packaging materials are not toys! Children must not play with plastic bags!
There is a danger of suffocation!
1x Multi-tool
1x Auxiliary handle
1x Battery 4Ah
1x Charger with VDE plug
1x Metal plunge blade
Note: If any parts are missing or damaged, please contact your dealer.

5. ASSEMBLY

WARNING! Ensure the multi-function tool is switched off and the battery is removed
before attaching the accessories.
5.1 ATTACHING ACCESSORIES (FIG.1)
1) Lift up the accessory locking lever (1).
2) Attach the accessory to the accessory drive spindle (6). (Fig. 1)
3) Lower down the accessory locking lever (1).
5.2 FITTING SAND PAPER
1) The sanding pad (11) must first be fitted to the spindle following the instructions above.
2) The sanding pad (11) is equipped with a hook and loop pad.
3) Press the sand paper (12) onto the sanding pad by aligning the edges and holes.
4) To remove, peel away the sanding pad (11) from an edge.
1x Scraper
1x Sanding pad
1x Sand paper
1x Instruction manual
12