Canceling A Connection With A Phone; Using The Watch In A Medical Facility Or Aircraft; Unpairing; If You Purchase Another Phone - Casio 5635 Operation Manual

Important!
If you have problems establishing a
●
connection, it could mean that CASIO
WATCHES is not running on the
phone. On the phone's Home Screen,
tap the "CASIO WATCHES" icon. After
the app starts up, hold down the
watch's (B) button for at least two
seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
CASIO WATCHES: "Watch settings"
"Connection time with the app".
n
Next, select a setting of 3 minutes, 5
minutes, or 10 minutes.
Canceling a Connection with a
Phone
To terminate a Bluetooth connection, press
any watch button besides (L).
After the connection is terminated, the
●
watch will return to the mode it was in before
connection was established.
Example: After connecting from the
Timekeeping Mode
Connected Disconnected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where connection with
a phone may cause problems, you can
perform the procedure below to disable auto
time adjustment. To re-enable auto time
adjustment, perform the same operation
again.
Operation Guide 5635
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (B) for at least two seconds
until the second hand points to [READY]
twice.
When a connection is established
between the watch and phone, [APP] will
change to [OK], and the second hand will
move from [READY] to [CONNECT].
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
3. Y
Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.

Unpairing

Unpairing the watch from a phone requires
both CASIO WATCHES phone app and watch
operations.
Deleting Pairing Information from the
●
CASIO WATCHES phone app
1. X
If the watch is connected with a phone,
press any button besides (L) to terminate
the connection.
After the connection is terminated, the
●
watch will return to the mode it was in
before connection was established.
Connected
2. Y
Tap the "CASIO WATCHES" icon.
3. Y
Perform the operation shown on the
phone screen to unpair.
Deleting Pairing Information from the
●
Watch
1. X
Hold down (E) for at least two seconds
to enter the Timekeeping Mode.
2. X
Hold down (D) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Connection
successful
3. X
Press (D).
This causes the seconds to flash.
4. X
Hold down (C) for at least two seconds.
Release it when [PAIR CLR] stops
flashing.
This deletes the pairing information from
the watch.
5. X
Press (D) to return to the Timekeeping
Mode.

If you purchase another phone

You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
Disconnected
Pair the watch with a phone.
l C
Home City
Seconds
16