Table of Contents
Advertisement
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
! 1
RFI Emission
! 2
Immunity
! 3
Warning: This product requires shielded cables to comply with emission
and immunity standards. If it is used with unshielded cables, the user may
be required to take measures to correct the interference problem at their own
expense.
! 4
Electrical Safety
Safety
! 5
Laser
! 6
Warning: Class 1 Laser product.
! 7
Warning: Do not stare into the Laser beam.
At time of installation, the Fiber Optic Lasers comply with FDA Radiation
Performance Standard 21CFR Subchapter J, applicable at date of
manufacture. Use of controls or adjustments of performance or procedures
other than those specified herein may result in hazardous radiation
exposure.
! 8
Lightning Danger
Danger: Do not work on equipment or cables during periods of lightning
activity.
! 9
Do not block air vents
! 10
Power to the hub must be sourced only from the adapter.
USA/Canada
Use a UL Listed/CSA Certified AC adapter of DC 12V, 500mA.
Europe - EU
Use TÜV licensed AC adapter of DC 12V, 500mA.
UK
Use a UK Safety Approved AC adapter of DC 12V, minimum 500mA.
! 11
Operating Temperature: This product is designed for a maximum
ambient temperature of 40 degrees C.
AT-MC100 Series Installation Guide
Industry Canada
EN55022 Class B
EN50082-1 1997
EN60950 (TUV), UL1950 (
EN60825
UL
)
c
us
25
Advertisement
Table of Contents
