E92
Inconsistency between configuration values on starting the appliance
Checks to perform:
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
E93
Inconsistency between configuration values on starting the appliance
Checks to perform:
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
E94
Inconsistency between configuration values on starting the appliance
Checks to perform:
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
E97: Inconsistency between control selector version and configuration
E97
Discrepancy between programme configuration data and selector recognition data
Checks to perform:
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
E9C
Checks to perform:
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
E9E
Checks to perform:
Replace the display board and repeat the diagnostic cycle to check for any further alarms
2012 SOE/DT-mdm FCPD-dp
Guide to diagnostics of EWM09312 electronic controls
E92: protocol incongruence
Incorrect configuration possible.
E93: Appliance configuration error
Incorrect configuration possible.
E94: Incorrect configuration of washing cycle
Incorrect configuration possible.
Incorrect configuration possible.
E9C: Display board configuration error
Incorrect configuration possible.
E9E: Display board sensor/touch key faulty
Display board faulty
!
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
data
!
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
If there are burns on the circuit board,
!
59/69
E92
E93
E94
E97
E9C
E9E
see page 67
599 75 18-74 Rev.00