E92
Inconsistency between configuration values on starting the appliance
Checks to perform:
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
E93
Inconsistency between configuration values on starting the appliance
Checks to perform:
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
E94
Inconsistency between configuration values on starting the appliance
Checks to perform:
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
E97: Inconsistency between control selector version
E97
Discrepancy between programme configuration data and selector recognition data
Checks to perform:
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
E98: Communication error between main PCB and Inverter board
E98
Incompatibility between the main circuit board and the Inverter board
Checks to perform:
Replace the main circuit board/Inverter board and repeat the diagnostic cycle to check
2011 SOE/DT-mdm FCPD-dp Quality-tb
Guide to diagnostics of electronic controls EWM10931
E92: protocol incongruence
Incorrect configuration possible.
E93: Appliance configuration error
Incorrect configuration possible.
E94: Incorrect configuration of washing cycle
Incorrect configuration possible.
and configuration data
Incorrect configuration possible.
Incorrect configuration possible.
for any further alarms.
!
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
!
62/75
If there are burns on the circuit
board, see page 73
599 73 77-37
E92
E93
E94
E97
E98