Mounting The Ap; Mounting Bracket; Mounting The Ap On A Wall - H3C UAP672X Installation Manual

Mounting the AP

The AP can be installed only outdoors. You can mount the AP on a wall or a pole.

Mounting bracket

Figure2-2 Mounting bracket

Mounting the AP on a wall

1. Mark the installation holes on the wall based on the installation hole positions in the AP.
Figure2-3 Marking the installation holes on the wall
2. Drill four holes with a diameter of 8 mm (0.32 in) and a depth of 30 mm (1.18 in) at the marked
locations. Use a rubber hammer to tap an expansion bolt into each hole.
Keep the drill bit perpendicular to the wall and hold the drill handle tightly with both hands

when drilling holes.
In a sturdy and smooth wall, use a punch to create a hole to help locate the drill bit.

The depth of the four holes must be the same.

Do not tap the expansion bolts all the way in, leaving a certain space for hanging the AP.

2-3