Mounting the AP
The AP can be installed only outdoors. You can mount the AP on a wall or a pole.
Mounting bracket
Figure2-2 Mounting bracket
Mounting the AP on a wall
1.
Mark the installation holes on the wall based on the installation hole positions in the AP.
Figure2-3 Marking the installation holes on the wall
2.
Drill four holes with a diameter of 8 mm (0.32 in) and a depth of 30 mm (1.18 in) at the marked
locations. Use a rubber hammer to tap an expansion bolt into each hole.
Keep the drill bit perpendicular to the wall and hold the drill handle tightly with both hands
when drilling holes.
In a sturdy and smooth wall, use a punch to create a hole to help locate the drill bit.
The depth of the four holes must be the same.
Do not tap the expansion bolts all the way in, leaving a certain space for hanging the AP.
2-3