Mounting The Ap; Mounting The Ap On A Wall - H3C WA6120H Installation Manual

•
Few obstacles such as wall exist between the AP and clients.
•
Reserve clearance around the AP for heat dissipation. Ensure a minimum distance of 2 m
(6.56 ft) between the AP and other radiant resources, for example, wireless base station
antennas.
•
The AP does not hinder people's daily work and life.
•
The place is not water seeping, water soaking, or condensing.

Mounting the AP

The AP can be installed only indoors. You can mount the AP on a wall or an Junction box.

Mounting the AP on a wall

1. Place the mounting bracket against the wall and mark the installation holes on the wall.
Figure 4 Marking the installation holes on the wall
2. Drill two holes with a diameter of 6 mm (0.24 in) and a depth of 30 mm (1.18 in) at the marked
locations, as shown in
Figure 5 Drilling holes in the wall
Figure 5.
2