Table of Contents
Advertisement
Mounting the AP
Attaching the mounting bracket to an 86 panel
Use the provided M4 × 30 mm pan-head screws to attach the mounting bracket to the 86 panel.
Figure2-2 Attaching the mounting bracket to the 86 panel
Connecting Ethernet cables
Use either of the two connection methods according to the power supply mode:
•
To use PoE power supply, use the Uplink/POE+ port as the uplink port.
•
To use DC power supply, use the GE/SFP port as the uplink port.
Connecting a cable to the Ethernet copper port
Connect a cable to the Uplink/PoE+ port at the rear panel of the AP and secure the cable into the
cable slot.
Advertisement
Table of Contents
