Install Hose Hook Up To Motor - Bootstrap Farmer DIY High Tunnel Plans Instructions Manual

● Wired directly to an outlet box
**Refer to local building codes and consult a licensed electrician if in doubt about
electrical work.

Install Hose Hook Up to Motor

1. Remove Baffle Cover
2. Install Metal Ring to Motor with #8 Self Tap Screws. Note the New Baffle position.
3. Adjust screw tightness to open/close the new baffle. Not too tight.
4. Hole 1 is the original baffle cover hole. Hole 2 is where the ring spacing will be.
Note, this IS NOT where the mounting will occur. This is just an example of how
Need Help? contact@bootstrapfarmer.com
Page 36
www.bootstrapfarmer.com