Installing Hoops To Ground Posts - Bootstrap Farmer DIY High Tunnel Plans Instructions Manual

Installing Hoops to Ground Posts

1. While on a ladder, one person eyeballs the top of the hoops as a partner adjusts
the height of the hoops at the ground posts. (20' has a center height of 10.75'.
The 12' has a center height of 8', and the 10' width has a center height of 8.5'.)
2. Adjust height and sides until they all line up and are level all the way along the
structure.
3. When you are satisfied with the hoops' alignment, drill a ¼" hole through the
hoop at the hole in the ground post. Secure with ¼"x2" bolt, flat washers, lock
washer, and ¼" nut.
NOTE: If you purchased optional bracing, installing on the ground posts now will
be much easier.
Scan QR for info on Installing Hoops to
Ground Posts or visit
https://youtu.be/S0iSPnsYVi0
Need Help? contact@bootstrapfarmer.com
Page 16
www.bootstrapfarmer.com