Table of Contents
Advertisement
Shade Cloth
Installation
● Shade Cloth Clips - A plastic clamshell with spikes that grip the shade cloth with
a hole in the middle to strap with rope, strap, or other securing line. This works
best if your shade cloth doesn't reach your hip board. Clips should be installed at
least every 24" and we suggest extra at the corners. If you are using clips you
can just secure the sides. Wind will pass through the knit so you do not have the
same wind loads as greenhouse plastic.
● Spring Wire - The shade cloth will fit into the same channel as your plastic.
Follow the same instructions as you would for a double layer. End wall hoop from
back to front and hip to hip.
Scan QR for info on
Shade Cloth or visit
https://youtu.be/KlJ0sz6FJJE
Need Help? contact@bootstrapfarmer.com
Page 38
www.bootstrapfarmer.com
Advertisement
Table of Contents
