Tecnotion TM3 Manual page 11

■
isopropanol wipes to clean mounting surfaces.
All these features are not a part of Tecnotion's standard delivery.
For installation, use non-ferromagnetic tools to prevent damaging the
magnet plates.
A digital Hall module for commutation and analog Hall module for
positioning can be used as cost effective alternatives to a separate
encoder system when positioning requirements are not too strict.
These products can be supplied by Tecnotion, information on these
products can be found in chapter 5. Tecnotion can also deliver an
optional stainless steel cover to protect the magnet plates during
operation, this can be convenient when small magnetic objects are in
proximity of the magnet plates.
In order to mount the coil units and magnet plates, bolts and (option-
ally) dowel pins are required. Information regarding these parts can
be found in chapter 4.
MOTOR COMPONENTS
11