Table of Contents
Advertisement
Child seat type
Please refer to
and
chapter on page 43.
Fig. 36 Child seat illustration
Use only an officially approved seat that is suita-
ble for the child.
Child seat standard
Child seats shall meet the GB27887 standard,
and child seats that pass the test of this standard
shall bear a qualified inspection mark. The in-
spection mark may contain the following child
seat data:
– Weight class,
– Height class,
– License class (general, semi-general or model
specific)
– License number.
Child seats weight classes
Class
Group 0
Group 0+
Group 1
Group 2
Group 3
– Weight class 0/0+: For the period from birth to
about 18 months , the best use of 0/0+ or 0/1
grade rear-facing infant seat
– Weight class 1: Group 1 (up to about 4 years
old) or group 1/2 (up to about 7 years old)
child seats with built-in seat belts are best for
children with appropriate weight limits.
– Weight class 2/3: Groups 2 and 3 are divided
into child seats with backrests and child seats
without backrests. Backrest child seats are
better protected than backless ones because
44
Owner's manual
at the start of the
Not all children fit the weight classification
above. Likewise, not all seats are suitable to be
installed in the car. Therefore, it is important to
verify that the child seat is suitable for children
to sit safely and can be reliably installed in the
car.
Child seats approval categories
Child seats can be divided into universal, semi-
universal and vehicle-specific according to the li-
cense category.
– Universal: Universal child seats can be instal-
– Semi-universal: In addition to meeting the
– Vehicle-specific: The vehicle-specific approval
Child weight
Up to 10 kg
Up to 13 kg
Installing and using child seats
9 to 18 kg
15 to 25 kg
chapter on page 43.
22 to 36 kg
Fig.
36.
→
Fig. 37 The airbag tag on the sun visor
they have built-in seat belt guides and side
padding. Volkswagen therefore recommends
the use of child seats with backrest. Two sets
of child seats are suitable for children up to 7
years old, and three sets are suitable for chil-
dren 7 years old or older.
led in all vehicles. No specific model needs to
be listed. Universal child seats with ISOFIX
need to be fixed by the top tether.
standard requirements of the universal appro-
val, the semi-universal approval requires a
safety device for securing the child seat, which
is subject to additional testing. The semi-uni-
versal child seat comes with a list of applicable
models. Only the train type listed in the list
can use the child seat.
requires the in-vehicle dynamic testing of child
seats for each applicable vehicle type. The ve-
hicle-specific child seat also has a suitable
model list.
Please refer to
and
at the start of the
Advertisement
Table of Contents
