Table of Contents
Advertisement
Fitting the towing eye at front
Please refer to
and
chapter on page 160.
Fig. 129 In the front bumper on the right: removing
the cover
Fig. 130 In the front bumper on the right: screwing
in the towing eye
The towing eye must always be kept in the vehi-
cle.
Pay attention to the tips about tow-
ing.
page 161
→
Fitting the front towing eye
– Always use the towing eye supplied in the ve-
at the start of the
– Press the marked area of the cover in the di-
– Remove the cover, allow it to hang on the ve-
– Turn the towing eye as shown by the arrow in-
– After you have finished towing, remove the
– Insert the cap in the respective recess and
– Clean the towing eye if necessary and place it
● If the towing eye is not screwed fully and se-
hicle toolkit.
page 151
→
rection of the arrow
Fig.
→
cover catch.
hicle.
to the threaded hole and tighten as far as pos-
sible
Fig. 130
. Use a suitable object to
→
→
screw the towing eye fully and securely into
the mounting.
towing eye by unscrewing it in the clockwise
direction using a suitable object.
press in until it engages.
back in the vehicle toolkit in the luggage com-
partment.
NOTICE
curely into the mounting, it can tear out of the
mounting during towing. The vehicle can be
damaged if the towing eye is torn out.
If and when
129to release the
163
Advertisement
Table of Contents
