Table of Contents
Advertisement
Displays
Please refer to
at the start of the chapter
on page 14.
Possible displays on instrument cluster
The type of information displayed on the instru-
ment cluster depends on the vehicle configura-
tion:
– Doors, bonnet and boot lid open
– Alerts and text messages
– Driving distance
– Travel time
page 22
→
– Ambient temperature
– Selector lever position display
– Shift cue
page 89
→
– Driving data display (Multifunction display
(MFD)
page 25
→
– Maintenance cycle display
– Speed limit warning
page 25
→
– Automatic engine start-stop system status
display
page 99
→
– The driver assistance system shows
page 108
→
Open doors, bonnet and boot lid
When the vehicle is unlocked or in motion, the
instrument cluster indicates whether the door or
engine hatch or tailgate is open. In some cases,
the system will also play a prompt tone. The dis-
play items may be different for different types of
instrument cluster.
Selector lever positions (automatic gearbox)
The selected selector lever position is displayed
next to the selector lever and on the instrument
cluster. If the selector lever is in gear D/S or
when you are in Tiptronic manual shift mode, the
screen displays the current speed
shift
page 102.
→
Outside temperature display
Depending on the vehicle and equipment,If the
ambient temperature falls below +4℃, the tem-
perature display will shows a snowflake symbol
(thin ice alert) in addition to the display tem-
perature. This symbol is displayed until the ambi-
ent temperature rises above +6℃
When the vehicle is at rest or travelling at a low-
er speed, the temperature displayed may be
slightly higher than the actual ambient tempera-
ture due to the thermal radiation effect of the
engine.
Temperature measurement ranges from -45℃ to
+76℃.
Gear-change indicator
To reduce fuel consumption, the display may
suggest a fuel-saving gear while the vehicle is in
motion
Mileage displays
Total odometer record the total miles travelled
by the vehicle.
One-way odometer (trip) indicates the distance
travelled since the last one-way mileage recorder
reset.
–
page 24
→
Automatic engine start-stop system status
display
The instrument cluster displays the current sta-
tus information of the automatic engine start-
stop system
Engine code
Depending on the vehicle type, some types of in-
strument cluster can display the engine code.
Models equipped with digital instrument cluster (basic) :
– In the instrument cluster menu, open the sub-
– Press and hold the button
– Select the Engine Code menu item.
Streets and Bridges can freeze when ambient
temperatures are around zero.
● "Snowflake" symbol indicates the danger of
● In ambient temperatures above +4 ° C, roads
.
→
page 89.
→
Models equipped with analogue instrument cluster:
One-way odometer can be reset by pressing
on the instrument cluster
0.0
SET
page 99.
→
menu Mileage/Time, select menu item Reset
"from the start " or Reset "the accumulation";
tifunction steering wheel about 5 seconds to
bring up the service menu
→
WARNING
thin ice.
may freeze even if the display does not dis-
play the snowflake symbol that indicates a
thin ice warning.
Driver information
page 15.
→
or
on the mul-
page 18;
17
Advertisement
Table of Contents
