Table of Contents
Advertisement
● Do not rely only on the ambient temperature
display screen to determine whether the
road is icy!
We have different models of instrument
cluster, so the type and display items of in-
strument cluster may be different. If the instru-
ment cluster has no alarm or message text dis-
play function, only the alarm/indicator lamp is
used to indicate vehicle failure.
If the system detects several faults, each
fault alert symbol is displayed for a few sec-
onds in turn. The fault symbol is displayed until
the fault is removed.
If the display displays fault alarm informa-
tion when the ignition switch is on, some
settings cannot be performed according to the
preceding methods, or the display may display
error information. In this case, you should drive
to qualified workshop as soon as possible to
troubleshoot the problem.
Service menu
Only applicable to models equipped with digital
instrument cluster (basic)
Please refer to
at the start of the chapter
on page 14.
Depending on the vehicle, the information can be
set in the service menu through the multifunc-
tion steering wheel.
Bring up the service menu
To bring up the Service menu, in the instrument
cluster menu, open the sub menu Mileage/Time,
select menu item Reset "from the start " or Re-
set "the accumulation", then press and hold the
button
or
on the multifunction steering
wheel for 5 seconds, you can use the button on
the multifunction steering wheel to navigate the
menu in the normal way.
Maintenance
Select the Maintenance menu and display the main-
tenance information on the instrument cluster.
Reset the oil change maintenance data
Select the Reset Oil Change Maintenance data menu
and confirm by pressing the button
multifunction steering wheel.
18
Owner's manual
Reset vehicle condition check data
Select the Reset Vehicle Condition Check data menu and
confirm by pressing the button
function steering wheel.
Engine code (MKB)
Depending on the vehicle, select the menu Engine
code. Engine code can be displayed on the instru-
ment cluster.
Set time
Select the Time menu and set the correct time by
pressing the button
steering wheel.
Copyright information
Depending on the vehicle equipment, select the
menu Copyright information, the copyright informa-
tion can be displayed on the instrument cluster.
Driving data (Multifunction display)
Only applicable to models equipped with analogue
instrument cluster
Please refer to
on page 14.
Driving data (multifunction display) display a va-
riety of vehicle driving data and fuel consump-
tion data.
Depending on the vehicle, it may show different
driving data. The driving data shown depends on
the current driving behaviour, vehicle condition
(e.g. particle catcher regeneration), and driving
condition (e.g. city or highway driving). The driv-
ing data is determined by the average of differ-
ent lengths of road, which means that the cur-
rently displayed value may differ from the actual
average.
Toggle display item
Press the button
tifunction steering wheel.
Switch drive data storage
Press the button
wheel.
Memory 1/ from the start
If the interrupted driving time is more than two
on the
hours, the system automatically deletes the data
in the memory.
on the multi-
on the multifunction
at the start of the chapter
or
page 26 in the mul-
→
in the multifunction steering
Advertisement
Table of Contents
