HOMCOM 823-047V70 Instruction Manual page 12

2. Clean the upper filter screen frame
1) Unscrew one screw fixed by EVA filter net and back shell with screwdriver, and
take out EVA filter net.
2) Put the EVA filter screen into warm water with neutral detergent (about 40℃ /
104℉) and dry it in the shade after rinsing clean.
Unit Storage:
1: Unscrew the rotary knob, unplug rubber stopper, and discharge the water in the water
pan into other water containers or directly tilt the body to discharge the water into other
containers.
2: Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state
until the drainage pipe becomes dry, so as to keep the inside of the body in a dry state
and prevent it from mildewing.
3: Turn off the machine, unplug the power plug, and wrap the power cord around the
wrapping post; install rubber stopper and the rotary knob.
4: Remove the exhaust pipe and keep it properly.
5: Cover the air conditioning with a plastic bag. Put the air conditioning in a dry place,
keep it out of the reach of children, and take dust control measures.
6: Remove batteries of the remote control and keep them properly.
Note: ensure that the body is placed in a dry place and keep all machine components
properly.
12