Sony DVCAM DSR-1800 Operating Instructions Manual page 96

nin
Bujoousejqnos pue eoueUE}UIeEy 9g JeIdeyD
co
Error Messages
This unit is provided with a self-diagnostic function that
detects internal abnormalities. When it detects an
abnormality, it outputs an error message to the monitor
screen and indicates an error code in the time counter
display.
ERROR
AN ERROR HAS BEEN
DETECTED. INFORM SERVI
OF FOLLOWING CODE:
02-603
PRESS EJECT KEY,
TO EJECT TAPE.
Monitor screen
If an error message appears, follow the direction indicated
on the monitor screen.
To display error messages on the monitor screen, connect
the monitor to the VIDEO OUT 2 (SUPER) connector, and
set the CHARA. DISPLAY menu item (see page 59) to
ON (factory default setting).
Error message
Error code
Direction Error code
prance Say,
Error02-603
Time counter display
Alarm Messages
When operating this unit, the unit may sometimes output
alarm messages such as the one shown below to the
monitor screen and the time counter display.
ALARM
REMOTE MODE IS SELECTED
PRESS REMOTE BUTTON:
TURNING IT OFF
Monitor screen
If such an alarm message appears, a connection or
operation error may have been made, or condensation on
heads may have occurred. Follow the direction indicated
on the monitor screen.
To display alarm messages on the monitor screen, it is
necessary for the monitor to be connected to the VIDEO
OUT 2 (SUPER) connector, and set the following menu
items to ON.
* CHARA. DISPLAY (see page 59)
* ALARM (see page 60)
* REF ALARM (see page 60)
Troubleshooting
Cause of
alarm
Direction
REMOTE!
Time counter display