Sony DVCAM DSR-1800 Operating Instructions Manual page 42

mM
uoesedo Buyipy 10} suonouny yueiueauog ¢ ueldeyD
42
Monitor screen contents
The contents of the monitor screen are shown below.
Time data type
Time data
E} Drop trame indication
for time code reader
Drop frame indication
for time code
generator @
BD VITC field
indication
iclRl Molo] Jol4iil4 [7 IT ol7 cy
| LT geyeyayyy TT [efofc]y |
DSR-1800/1800P operation mode
a) This character (.) can appear on the DSR-1800 only. The
character to appear in these two columns is always a colon
(:) on the DSR-1800P.
Time data type
The following time data type indications are displayed.
Count value of the time counter
TCR Time code data from time code reader
(factory default setting)
Time code data from VITC reader )
User bit data from VITC reader ®)
Time code data from time code generator
User bit data from time code generator
Time code data from time code reader. The
asterisk indicates an interpolation by the time
U*R >)
code reader to make up for the time code
data not correctly read from the tape.
User bit data from the time code reader. The
asterisk indicates that last data is retained by
the time code reader, as the new data has
not been read correctly from the tape.
a) You can switch between TC and VITC using the TC SELECT menu item
(see page 61).
b) "*" is displayed when data cannot be read in correctly.
EJ Drop frame indication for time code reader (on
DSR-1800 only)
Mee = tach Drop frame mode (factory default setting)
Sane, Non-drop frame mode
Setting the Time Data
Drop frame indication for time code generator
(for DSR-1800 only)
a Drop frame mode (factory default setting)
| Non-drop frame mode
[) VITC field indication
(blank) Display fields 1 and 3.
Display fields 2 and 4.
j
[4 DSR-1800/1800P operation mode
Fast forward mode
REC
Cassette is not loaded.
Tape loading
Tape unloading
Standby off mode
Tape tension released
[REC [Record made (Gene uiocod) —_|
=
io