Sony DVCAM DSR-1800 Operating Instructions Manual page 107

The following describes how to record the various
ClipLink log data items.
All scenes that do not receive an "NG" deginiatin are
recorded as "OK" scenes.
(When you exit the VCR recording mode, changing the
OK/NG status is no longer possible.)
Set the camera to MARK mode before you start shooting.
While shooting, each time you press the camera's TAKE
button, Mark IN and Mark OUT point time codes are
recorded alternately.
Rec OUT
(automatic
recording)
Cue point
time code .
; (manual Cue point
Cue point recording) time code
Rec IN time code (manual
(automatic (manual recording)
tecording) | recording)
Index picture 1 Index picture 2
Start End
recording recording
Mark OUT
Mark IN (manual
(manual recording)
recording)
Mark OUT
(manual
recording)
Mark IN
(manual
recording)
a
ClipLink Guide
"eee th
107