Sony DVCAM DSR-1800 Operating Instructions Manual page 65

AUDIO CONTROL [Audio]: Settings related to audio Description of settings
control
*LINE OUT [>> line out]: Output the audio channel-3 and
audio channel-4 signals from the AUDIO OUT CH-3 and
AUDIO OUT CH-4 connectors as they are.
MONITOR OUT [>> monitor]: Output the monitor audio L-
channel (CH-1) and monitor audio R-channel (CH-2)
signals from the AUDIO OUT CH-3 and AUDIO OUT CH-
4 connectors, respectively.
AUDIO OUTPUT PHASE: 0 to FF (Select in this range.)
The reference position corresponds to a setting of 80H. When
a value smaller than 80H is selected, the output timing is
advanced, and when a value larger than 80H is selected, the
output timing is delayed. (80H = 128 samples = approx. 2.7
ms, 1 sample = approx. 20 us)
Factory default setting: 80H
JOG CONTROL [> Jog ctrl]: Select whether to adjust the OFF [>> OFF]: Do not adjust the audio playback speed.
audio playback speed during slow playback. *ON [>> ON]: Adjust the audio playback speed.
SHUTTLE MUTE [>Shut! mute]: Set the audio muting *OFF [>> OFF]: Not muted.
conditions during shuttle playback. CUEUP or PREROLL [>> CUEUP]: Muted during cue-up or
preroll operations.
FULL [>> FULL]: Muted in shuttle mode.
CUT EDIT [>> Cut edit]: Cut editing (Discontinuity in audio
signal may result at the editing point, causing noise during
playback.)
*CROSS FADE [>> Cross]: Cross-fade
OUTPUT CH3/4 [>OUT ch3/4]: Select the signals to be output
from the AUDIO OUT CH-3 and AUDIO OUT CH-4
connectors.
OUTPUT PHASE [>Out phase]: Select the audio playback
signal output timing.
AUDIO EDIT [>Audio edit]: Specify the type of editing for
audio signals.
IN/OUT
FADE IN/OUT [>> Fade]: Fade in and fade out
IN OUT
t
lee Ni,
2V PB ATT [>DV PB ATT]: When playing back a tape OFF [>> OFF]: Do not attenuate.
recorded in consumer DV format, select whether to *ON [>> ON]: Attenuate.
attenuate the audio output level.
JIGITAL PROCESS [Digi. proc]: Settings related to digital | Description of settings
drocess
3YSTEM EE MODE [>System EE}: Select the bypass E-E
mode or system E-E mode.
*OFF [>> OFF]: Bypass E-E (ordinary setting)
ON [>> ON]: System E-E
Menu Contents
Hn
Smaps mew: eee UTHUUT TI
sBumes nuey ¢ seldeyp
65 67