PROAIM P-DMC Assembly Manual page 2

Director's Cage Setup
Director's Monitor Cage
•
Insert the plastic washer into the 1/4"-2" bolt
and insert it into the Director's Monitor Cage,
as shown in the image.
•
Now, insert the post into the bolt.
•
Repeat the same step to insert the remaining
bolts and posts.
Main Bracket Assembly
•
Insert the bolts into the main bracket aligning
with the threads.
•
Tighten the bolts using the 4mm Allen key.
•
First Main Bracket is securely attached to the
Director's Monitor cage Plate.
Assembly
2