Before Calling For Service - ACP STYLE 1 Owner's Manual

Before Calling for Service

Record all inspections and repair for future reference.
To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time.
Only an authorized servicer should remove outer case.
SYMPTOM
Oven fan runs and light remains on after
cook cycle has completed
Oven fan runs while oven is not cooking
Oven does not operate
If oven does not accept entries when
keypad is pressed
If oven malfunctions
Oven operates intermittently
Oven operates, but does not heat food
"Clean Filter" displays
Frozen oven display
"INVALID ENTRY" alert
"Exceeds Maximum Cook Time" alert
©2020 ACP, Inc.
Cedar Rapids, IA 52404
⚠
WARNING
POSSIBLE CAUSE
Fan cools oven components. It is normal for fan to run 60 seconds
Normal operation
Confirm oven is plugged in.
Check fuse or circuit breaker.
Confirm oven is plugged into dedicated circuit.
Confirm oven is on grounded and polarized circuit. Contact electrician to confirm.
Open and close oven door. Press keypad again.
Unplug oven, wait for 1 minute, and plug in oven.
Check air filters and discharge area for obstructions
Place one cup cool water in oven. Heat for one minute. If water temperature does not rise, oven
is operating incorrectly and a service should be called.
This is normal and will appear for 24 hours.
Oven display needs to reset. Unplug oven. Wait 5 seconds. Plug back in.
Cook time is zero or unset. Enter correct cook time.
Total cook time exceeds the maximum allowable.
Check cook times per stage.
Check User Option>Maximum Cook Time
Amana® Commercial HDC
Contact:
email: commercialservice@acpsolutions.com
For full product documentation visit:
www.acpsolutions.com
Page 24 of 24
Menumaster® MDC/DEC
Contact:
Part No. 20267401
Revised 9/2020