Table of Contents
Advertisement
Programming
STYLES 1 & 4
Quantity X2 Programming
This feature allows a preset percentage of original cook time, called a
cook factor, to be added to a cook sequence. Default cook factor is 80%
unless otherwise stated.
EDIT THE COOK FACTOR
From READY or DOOR OPEN screen:
1.
Press and hold number keypad "3"/ PROGRAM
2.
Press number keypad(s) to open the desired program location
• PROGRAM ENTRY screen is displayed
3.
Press and hold number keypad "2" / POWER LEVEL
• EDIT COOK FACTOR screen is displayed
• Press number keypads to enter cook factor between 10 - 100%
• Press START/OK keypad to save and return to program entry screen
Folders Programming (optional)
Note: Folders must first be enabled in User Options> DIGIT ENTRY.
NAVIGATE FOLDERS
•
To open folder: Press number keypad to open the desired folder
•
To exit folder: Press STOP/RESET keypad
CREATE FOLDERS
Note: Desired keypad location must be empty "- Available" before creating a folder.
From READY or DOOR OPEN screen:
1.
Press and hold number keypad "3"/ PROGRAM
• Oven will display list of preset program and available locations
• The first available location will be highlighted. If no locations are available, the first
preset program on the first page will be highlighted.
• Display automatically toggles to the next page of program locations every 2 seconds.
Select the START pad to manually toggle to next page.
2.
Press an "- Available" keypad from 0-9.
• PROGRAM ENTRY screen is displayed
To edit name: Press number "0" keypad. Press number keypads to enter name. Press
3.
START/OK keypad to save name.
4.
To save folder: Press START/OK keypad.
DELETE FOLDERS
From READY or DOOR OPEN screen:
1.
Press and hold number keypad "3"/ PROGRAM to enter programming mode.
2.
Press and hold the number keypad corresponding to folder to delete it.
• Contents of a deleted folder will be moved to the top level
©2020 ACP, Inc.
Cedar Rapids, IA 52404
Page 12 of 24
3
1
3
4
Part No. 20267401
Revised 9/2020
Advertisement
Table of Contents
