Table of Contents
Advertisement
Operation
STYLES 1 & 4
Interrupting Operation
Open oven door or press STOP/RESET keypad to interrupt operation.
Display continues to show countdown time. Close door and press START/
OK keypad to resume oven operation.
Canceling Mistakes
If oven is not cooking, press STOP/RESET keypad to clear display.
If oven is cooking, press STOP/RESET keypad once to stop oven, then again to
clear display.
If oven door is open and time shows in display, close oven door and press STOP/
RESET keypad to clear display.
Operating Preset Program Keypads
From the factory, this oven comes preprogrammed with several cooking sequences in
memory. To heat using a preset program, press number keypad(s). Oven will start to heat
automatically.
1.
Open oven door, place food in oven, and close oven door.
• READY screen is displayed
• If keypad is not pressed within 60 seconds, open and close oven door again.
2.
Press desired number keypad(s)
• Single Digit Keypad Cooking: press a single keypad (0-9)
• Double Digit Keypad Cooking: press the two keypads, in order, of the double digit
number for the desired cooking sequence (00-99)
• Folders: press one keypad to open folder (0-9), followed by keypad for desired
cooking sequence (0-9)
Note: To change Digit Entry option see User Options section in this manual
3.
Oven operates and time counts down.
• Display shows the program name and counts down cooking time.
• If additional cooking time is required, press preset keypads before or after cooking
cycle ends.
4.
At the end of the cooking cycle, the oven beeps. Carefully remove food from oven.
X2 - DOUBLE QUANTITY COOKING (optional)
Press and hold number keypad "5"/ X2 to toggle double quantity feature ON.
• "X2" appears at top center of screen when enabled.
Press desired number keypad(s).
•
Display shows the program name and counts down cooking time for two
quantities.
MENU A/B (select models)
Press and hold number keypad "6" to toggle between A and B menus.
Quantity Prompt (select models)
1.
Press desired number keypad(s)
• ENTER QUANTITY screen is displayed
2.
Enter desired quantity using keypad 1-9
• Display shows the program name and counts down cooking time.
Quantity is displayed in top left corner.
©2020 ACP, Inc.
Cedar Rapids, IA 52404
1
Page 8 of 24
FACTORY PRESET PROGRAMS
Menu A
KEYPAD
TIME
POWER
1
10 sec.
2
20 sec.
3
30 sec.
4
45 sec.
5
1:00 min.
100%
6
1:30 min.
7
2:00 min.
8
3:00 min.
9
4:00 min.
0
5:00 min.
Factory setting may vary by model
1
3
4
2
Part No. 20267401
Revised 9/2020
Advertisement
Table of Contents
