Table of Contents
Advertisement
Control Panel and Features
STYLES 1 & 4
Note: There are four styles of controls shown Style 1, Style 2, Style 3, and Style 4. Choose the control that matches unit.
Control panel coloring may vary by model.
Control Panel Features
(A) USB PORT (select models)
Standard USB flash drive compatible.
Allows for import/export of
programmed settings and user options,
and to update firmware.
(B) DISPLAY
2.8" Color LCD Display
(C) NUMBER KEYPADS
Used to operate preset cooking
programs; enter settings; navigate
through display; and/or activate
secondary keypad functions.
(D) START/OK KEYPAD
Begins cooking in Manual Time
Entry Mode. Restarts an interrupted
cooking cycle. Used to save settings
and entries. Toggles through pages in
Programming and User Option Modes.
(E) STOP/RESET KEYPAD
Interrupts operation, and/or exits
modes and menus
(F) SECONDARY FUNCTION KEYPADS
To activate, press and hold corresponding number keypad for 0.75 seconds.
Note: Press and hold time can be set between 0.75 – 2 seconds by factory option.
(i)
Manual Time Entry Mode (keypad "1")
Allows the operator to heat without changing the preset program keypads.
(ii)
Power Level (keypad "2")
Use to set microwave power level between 0% to 100% in 10% increments (1 = 10% power, 2=20%, 3=30%, etc.) while in Manual
Time Entry Mode. Used to edit COOK FACTOR while in Programming Mode.
(iii) Programming Mode (keypad "3")
Edit preset programs and/or create new programs for customized cooking.
(iv) User Options (keypad "4")
Allows the user to customize various oven settings.
(v)
X2 - Double Quantity Cooking (keypad "5")
Increases a preset cook time by a percentage of the original cook time, also know as a COOK FACTOR. Used for cooking multiple
servings of foods.
(vi) Menu A/B (keypad "6")
Toggles menu selection between two sets of programmed cook settings. "Menu A/B" function only available when factory option
ALLOW AB MENU is enabled
General Display Screens
READY SCREEN
Indicates oven is ready to operate. The operator may press keypads to
begin preset programs or to activate secondary keypad functions.
• Menu A/B disabled
• Quantity X2 disabled
©2020 ACP, Inc.
Cedar Rapids, IA 52404
(A)
(A)
• Menu A open
• Quantity X2 enabled
Page 6 of 24
(B)
(F)
(i)
(ii)
(iii) (iv)
(B)
(F)
(i)
(ii)
(iii) (iv)
STANDBY SCREEN
(C)
(v) (vi)
(C)
(D) (E)
(v) (vi)
DOOR OPEN SCREEN
Part No. 20267401
Revised 9/2020
(D) (E)
Advertisement
Table of Contents
