Table Of Contents; Introduction - Husqvarna BGS 250 Operator's Manual

Introduction..................................................................... 2
Safety..............................................................................6
Operation...................................................................... 10
Maintenance................................................................. 16
Owner responsibility
WARNING:
stone by methods such as cutting, grinding
or drilling, especially during dry operation,
generates dust that comes from the material
being processed, which frequently contains
silica. Silica is a basic component of sand,
quartz, brick clay, granite and numerous
other minerals and rocks. Exposure to
excessive amount of such dust can cause:
Respiratory disease (affecting your ability
to breathe), including chronic bronchitis,
silicosis and pulmonary fibrosis from
exposure to silica. These diseases may be
fatal;
Skin irritation and rash.
Cancer according to NTP* and IARC* */
National Toxicology Program, International
Agency for Research on Cancer.
Take precautionary steps:
Avoid inhalation of and skin contact with
dust, mist and fumes.
Wear and ensure that all bystanders
wear appropriate respiratory protection such
as dust masks designed to filter out
microscopic particles. (See OSHA 29 CFR
Part 1926.1153)
To minimize dust emissions, use water
to bind the dust, when feasible. If dry
operation is necessary, use an appropriate
dust extractor.
It is the owner's/employer's responsibility that the
operator has sufficient knowledge about how to use the
2
Contents

Introduction

Processing of concrete and
Troubleshooting............................................................ 19
Transportation and storage...........................................20
Technical data.............................................................. 21
Declaration of Conformity............................................. 24
product safely. Supervisors and operators must have
read and understood the Operator's Manual. They must
be aware of:
• The product's safety instructions.
• The product's range of applications and limitations.
• How the product is to be used and maintained.
National/Local regulations could restrict the use of this
product. Find out what regulations are applicable where
you work before you start using the product.
Product description
The product is an electric floor grinder to operate on
horizontal surfaces. The grind range is from rough
surfaces through to smoother finish.
For example, the product has these functions:
• A grinding head cover that adjusts the movement to
the surface layer.
• A grind area of 250 mm.
Intended use
The product is used to grind surfaces of materials with
different hardness such as natural stone, terazzo and
concrete. Use the product to remove cover materials
such as glue. The product is used for dry grinding.
Only use the product on horizontal surfaces and in dry
conditions. Do not use the product to grind wood.
The product is used in commercial operations by
professional operators.
Use the product with an approved dust collection
system.
WARNING:
other tasks.
Do not use the product for
2363 - 002 - 12.03.2024