Husqvarna BGS 250 Operator's Manual page 12

Diamond tools
There are many types of diamond tools for the product.
Speak to your approved service center or go to to select
correct diamond tool.
To replace the diamond tools
WARNING:
power plug before you replace the diamond
tools, to prevent accidental start.
WARNING:
diamond tools can become very hot.
WARNING:
protection when you replace the diamond
tools. The dust below the grinding head is
dangerous to your health.
WARNING:
when you replace the diamond tools. The
dust extractor will decrease the dust that can
cause health problems.
1. Stop the product and disconnect the power plug.
To stop the product on page 14 .
Refer to
12
Always disconnect the
Use protective gloves, the
Use approved respiratory
Use the dust extractor
2. Adjust the handlebar to upright position.
3. Tilt the product rearward and fold down the
handlebar until the handle is on the floor.
CAUTION:
power cord and the dust extractor hose
do not become damaged when you tilt
the product.
CAUTION:
thin wood below the handle to prevent
damage to the floor.
WARNING:
product is in a stable position before you
replace the diamond tools.
Make sure that the
Put a piece of cloth or
Make sure that the
2363 - 002 - 12.03.2024