MQ Power WHISPERWATT DCA125SSIU4F Operation Manual page 61

HOW TO ACTIVATE ESCAPE MODE
If the ECU displays any messages referenced in Table 18,
it may be necessary to restart via ESCAPE MODE.
Starting
1. Start the Diagnostic Mode as referenced in the
"Troubleshooting Diagnostics" section in this manual.
2. Exit the Status Check Screen by pressing the [EXIT]
button (Figure 88).
E
E
HOURS
00018.3
CANBUS IS WORKING OK
EXIT
[EXIT]
DIAGNOSTIC MODE
BUTTON
Figure 88. Status Check Screen
(Diagnostic Mode)
DCA125SSIU4F 60 HZ GENERATOR • OPERATION MANUAL — REV. #6 (05/12/22) — PAGE 61
STATUS CHECK
F
F
DEF
26.8v
3. Press the [Program/Exit] button (Figure 89) to enter
the Main Menu.
SPEED
0000
E
E
DEF
CANBUS IS WORKING OK
Alarm Screen
Change
Figure 89. Main Screen
4. Press the [DOWN] button (Figure 90) to scroll to the
Escape Mode item.
FAULT DIAGNOSTICS
ABOUT UNIT
USER LOGIN
ESCAPE MODE
UP
Figure 90. Main Menu (Down Button)
MAINTENANCE
F
F
Program
Option
Exit
[PROGRAM EXIT]
BUTTON
DOWN SELECT
[DOWN]
BUTTON