Ceramic Logs Installation - Inca Metal Cutting DCF36-LIGHT Installation And Operating Instruction

Table of Contents

Advertisement

3.3.5 CERAMIC LOG INSTALLATION / INSTALLATION BÛCHES EN CÉRAMIQUE
Burn medium positions are critical to the safe and clean operation of this appliance.
Never add any other material into the firebox. Use only with burn medium supplied
with this unit.
Burn positions moyennes sont critiques pour le fonctionnement sûr et propre de cet
appareil. Ne jamais ajouter d'autres matériaux dans le foyer. Utilisez uniquement
graver moyen fourni avec cet appareil.
Position logs as shown. Do not rely on manufacturer's stamped numbers as they may differ each
time logs are made. Positionnez les journaux comme indiqué. Ne vous fiez pas aux numéros
estampillés du fabricant, car ils peuvent différer des journaux de temps sont établis.
The firebox has 6 pins for positioning the log placement. (4 pins on the burner tray and 2 pins on the
back log standoffs). Please follow instructions carefully and accurately as this will prevent soot
buildup on the logs and ensure correct flame pattern./ La chambre de combustion a 6 broches pour
positionner le placement de la bûche. (4 broches sur le plateau du brûleur et 2 broches sur les
entretoises arrière). Veuillez suivre les instructions avec soin et précision, car cela empêchera
l'accumulation de suie sur les bûches et garantira un motif de flamme correct.
Position Log #1 on the 2 pins on the standoffs for the back log as shown below / Positionnez la bûche
#1 sur les 2 broches des entretoises pour la bûche comme indiqué ci-dessous
Page 34 of 57

Advertisement

Table of Contents
loading

Table of Contents