Yamaha MC803 Operation Manual page 3

1. AVOID EXCESSIVE HEAT, HUMIDITY, DUST
AND VIBRATION | |
Keep the unit away from locations where it is likely to
be exposed to high temperatures or humidity — such
as near radiators, stoves, etc. Also avoid locations
which are subject to excessive dirt accumulation or
vibration which could cause mechanical damage.
2. AVOID PHYSICAL SHOCKS
Strong physical shocks to the unit can cause damage.
Handle it with care.
3. DO NOT OPEN THE UNIT, OR ATTEMPT
REPAIRS OR MODIFICATIONS YOURSELF
This product contains no user-serviceable parts. Reter
all maintenance to qualified Yamaha service person-
nel. Opening the unit and/or tampering with the inter-
nal circuitry will void the warranty.
4. MAKE SURE POWER IS OFF BEFORE
MAKING OR REMOVING CONNECTIONS
Always turn the power OFF prior to connecting or dis-
connecting cables. This is important to prevent dam-
age to the unit itself as well as other connected
equipment.
5. HANDLE CABLES CAREFULLY
Always plug and unplug cables — including the AC
cord — by gripping the connector, not the cord.
6. CLEAN WITH A SOFT DRY CLOTH
Never use solvents such as benzine or thinner to
clean the unit. Wipe clean with a soft, dry cloth.
7. ALWAYS USE THE CORRECT POWER
SOURCE
Make sure that the power source voltage specified on
the rear panel matches your local АС mains supply:
U.S. 8 Canadian Model: 120V AC, 60Hz `
British Model : 240V AC, 50Hz
General Model: 230V АС, 50Hz