Table of Contents
Advertisement
1.8 Termination of FL Solutions Program
After completion of measurement, shut down the instrument in the following procedure.
1.
From the File menu, select the Exit command. A window appears as shown below.
2.
For termination without turning off the light source lamp, select "Close the monitor window, but keep
the lamp operating?". For termination after turning off the light source lamp, select "Close (Turn off)
the lamp, then close the monitor window?". Click Yes, and the FL Solutions program will then be
terminated.
3.
Turn off the power switch of the spectrophotometer main unit.
Click the start button of Windows, select "Turn Off Computer" and click OK.
4.
5.
Turn off the power to the PC and CRT.
6.
Turn off power to the printer.
Fig. 1-39
1 - 27
Advertisement
Table of Contents
