Quick Hitch (Hook Type) - Kubota L3540 Operator's Manual

66 THREE-POINT HITCH & DRAWBAR
BQuick Hitch (Hook type)
To avoid personal injury:
Confirm the under mentioned matter when
installing the implement:
A Make sure the hook of a quick coupler is surely
locked.
The 3-point hitch with quick-hitch, all of which have claw
ends that permit rapid attaching and detaching of
implements.
C Installing Ball-joint to Implement
Before the implement is installed on the 3-point hitch with
quick couplers, it is necessary to install the ball-joints to
the implement according to the following instructions.
1. The ball-joints with guide cones should be installed on
the lower hitch pins with the cones in the lowest
position.
(1) Ball-joint with guide cone
C Adjusting Lower Link Width
Set the width (W1) of lower links to be the same as width
(W2) of the implement.
(See "Check Chains" in this section to adjust the width
(W1) of lower links.
(1) Lower link
(2) Check chain
(3) Implement