Thank You; Warranty; Safety - SawStop REVOLUTION TSA-RMG Owner's Manual

THANK YOU

Thank you for purchasing the SawStop Revolution Miter
Gauge. This product has been carefully designed, rigorously
tested, and contains innovations not seen before in the
market place. We want you to get the most out of this
product. To ensure the best possible experience, please
read the instructions in their entirety prior to use. In this
manual, you will find detailed instructions for the correct,
accurate, and safe operation of your miter gauge.

WARRANTY

SawStop warrants to the original retail purchaser of a new
Revolution Miter Gauge from an authorized SawStop
distributor that the Revolution Miter Gauge will be free from
defects in material and workmanship for ONE YEAR from
the date of purchase.
This warranty does not apply to defects arising from
misuse, abuse, negligence, accidents, normal wear-and-
tear, unauthorized repair or alteration, or lack of
maintenance. This warranty is void if the Revolution Miter
Gauge or any portion of the Revolution Miter Gauge is
modified without the prior written permission of SawStop,
LLC, or if the Revolution Miter Gauge is located or has been
used outside of the country where the authorized SawStop
distributor from whom the product was purchased resides.
Please contact SawStop to take advantage of this warranty.
If SawStop determines the Revolution Miter Gauge is faulty
in material or workmanship, and not due to misuse, abuse,
negligence, accidents, normal wear-and-tear, unauthorized
repair or alteration, or lack of maintenance, then SawStop
will, at its expense and upon proof of purchase, send
replacement parts to the original retail purchaser
necessary to cure the defect.
SawStop disclaims any and all other express or implied
warranties, including merchantability and fitness for a
particular purpose. SawStop shall not be liable for death,
injuries to persons or property, or incidental, consequential,
contingent or special damages arising from the use of this
Revolution Miter Gauge.
|
4 Revolution MIter Gauge Owner's Manual
This warranty gives you specific legal rights. You may have
other rights which, in the United States, vary from state to
state.

SAFETY

Be sure to wear hearing protection, eye protection,
l
and follow all normal shop safety practices at all
times.
Before starting any cutting/milling operations with
l
your Revolution Miter Gauge, always securely
tighten the large vertical grip/handle first.
Never let the saw blade or cutter in your machine
l
come in contact with any component of your
Revolution Miter Gauge. Verify that nothing but the
material you intend to cut or mill is in the path of
the blade before turning on the tool.
Always take care to keep your hands clear of blade
l
or cutter of the tool that you've chosen to use your
miter gauge with.
When using the flip stop accessory to position a
l
workpiece for cutting/milling operations, always
hold or otherwise secure the board against the
miter gauge fence as you guide the workpiece past
the cutter or blade.
After re-positioning the fence, be sure the two
l
knurled, silver thumbscrews that secure the fence
to the body of the miter gauge are sufficiently
tightened.
The scope of this manual does not include
instructions for the machine you are using the
Revolution Miter Gauge with. These instructions
assume you are competent and qualified in the safe
and proper operation of the machinery you have
chosen to accessorize with this miter gauge.