HIKVISION N4225IH-DE User Manual page 74

User Manual of Network PTZ Camera
3. Select DDNS Type. Two DDNS types are selectable: DynDNS and NO-IP.
 DynDNS:
Steps:
(1) Enter Server Address of DynDNS (e.g. members.dyndns.org).
(2) In the Domain text field, enter the domain name obtained from the DynDNS website.
(3) Enter the Port of DynDNS server.
(4) Enter the User Name and Password registered on the DynDNS website.
(5) Click
 NO-IP:
Steps:
(1) Enter Server Address of NO-IP.
(2) In the Domain text field, enter the domain name obtained from the NO-IP website.
(3) Enter the Port of NO-IP server.
(4) Enter the User Name and Password registered on the NO-IP website.
(5) Click
Configuring PPPoE Settings
Purpose:
If you have no router but only a modem, you can use Point-to-Point Protocol over Ethernet
(PPPoE) function.
Steps:
1. Enter the
PPPoE settings interface:
Configuration > Network > Basic Settings > PPPoE
© Hikvision
to save the settings.
Figure 6-3 DynDNS Settings
to save the settings.
Figure 6-4 PPPoE Settings
67