Table of Contents
Advertisement
User Manual of Network PTZ Camera
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions by NTP server. It can be
set from 1 to 10080 minutes.
You can click
to make sure that the NTP server is connected.
If the camera is connected to a public network, you should use a NTP server that has a time
synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44). If the camera is set in a customized network, NTP software can be used to
establish a NTP server for time synchronization.
Configuring Time Synchronization Manually
Steps:
(1) Check the Manual Time Sync radio button.
(2) Click
to set the system time from the pop-up calendar.
(3) Click
You can also check the Sync with local time checkbox to synchronize the time of the camera
with the time of your computer.
Select the Time Zone
Purpose:
When the camera is taken to another time zone, you can use the Time Zone function to adjust
© Hikvision
Figure 6-44 Time Sync by NTP Server
to save the settings.
Figure 6-45 Time Sync Manually
94
Advertisement
Table of Contents
