Table of Contents
Advertisement
User Manual of Network PTZ Camera
2. Check the Enable checkbox.
3. The event triggered and park action related PTZ movement will be locked for 180 seconds
after you enter the intrusion detection interface. Optionally, you can click the
when the button turns to
4. Draw area.
1) Select the Region No.in dropdown list.
2) Click
3) Click on the image to specify a corner of the rectangle, and right-click the mouse after
four corners are configured.
5. Configure the parameters for each defense region separately.
Threshold: Range [0-10s], the threshold for the time of the object loitering in the region. If
you set the value as 0, alarm is triggered immediately after the object entering the region.
Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the object which
can trigger the alarm, when the sensitivity is high, a very small object can trigger the
alarm.
6. Click
© Hikvision
Figure 5-22 Configuring Intrusion Area
button to manually activate the movement, or lock the movement
to draw a rectangle on the image as a defense region.
tab to enter the arming schedule setting interface. The time
by clicking it.
51
Advertisement
Table of Contents
