Table of Contents
Advertisement
User Manual of Network PTZ Camera
For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The
password should be something of your own choosing (using a minimum of 8 characters,
including upper case letters, lower case letters, numbers and special characters) in order
to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
6.
Click OK to start activation.
7.
Click Modify Netinfo to pop up the Network Parameter Modification interface, as shown in
Figure 2-9.
8.
Change the device IP address to the same subnet with your computer by either modifying
the IP address manually or checking the checkbox of Enable DHCP.
9.
Input the password to activate your IP address modification.
© Hikvision
Figure 2-8 Activation Interface
Figure 2-9 Modifying the Network Parameters
9
Advertisement
Table of Contents
