Table of Contents
Advertisement
User Manual of Network PTZ Camera
4. Click
schedule configuration is the same as the setting of the arming schedule for motion detection.
Refer to Section 5.2.1 Configuring Motion Detection.
5.
Click
Notify Surveillance Center, Send Email, Upload to FTP/Memory Card/NAS, Trigger Alarm
Output and Trigger Recording. Refer to Section 5.2.1 Configuring Motion Detection.
6. You can also choose the PTZ linking for the alarm input. Check the relative checkbox and
select the No. to enable Preset Calling, Patrol Calling or Pattern Calling.
7. You can copy your settings to other alarm inputs.
8. Click
© Hikvision
Figure 5-16 Alarm Input Settings
tab to enter the arming schedule setting interface. The arming
tab to select the linkage method taken for alarm input, including
to save the settings.
Figure 5-17 Linkage Method
46
Advertisement
Table of Contents
